SkyView
HDX System
General Maintenance Manual, Revision F
Page | 73
8 Component Removal and Installation
This section contains removal and installation instructions for the SkyView HDX system
components. It is intended to be used in conjunction with Section
8.1
Equipment Installation Record
Per the
SkyView HDX System Installation Manual
document, a record of the equipment
installation, including component locations, installation notes, wiring routing, and drawings,
should have been made by the mechanic or facility that installed the SkyView HDX system. That
document should be kept with the airplane.
8.2
Access to Equipment
and
for typical SkyView HDX system components locations and layouts.
The majority of the SkyView HDX system components are located behind the instrument panel.
Locations may differ depending on installation, so refer to
SkyView HDX System Equipment
Installation Record
document associated with the airplane. You may need to remove the
SkyView HDX Display from the instrument panel to access some equipment.
The instrument panel should be based on the aircraft’s existing panel. The illustrations that follow
provide suggestions for layout configuration of the SkyView HDX Displays and associated
components.