SkyView
Airplane Flight Manual Supplement, Rev N,
10/23/2020
Page | 3-3
3.2 Non-Normal Procedures
Loss of Airspeed, Altitude, Attitude, and/or Heading Display
CONDITION:
Red X replaces the airspeed, altitude, attitude and/or heading indicators.
If the Autopilot is engaged, the AUTOPILOT DISCONNECT Warning Alert
annunciates.
1. AP DISC Button___________________________________________________ PRESS.
2. Aircraft Attitude _____________________ MAINTAIN / REGAIN AIRCRAFT CONTROL.
3. Plan to land at nearest suitable airport.
•
Monitor Secondary Displays, Standby Display, and other sensory cues as available.
Loss of Electrical Power
CONDITION:
AIRCRAFT POWER LOST message is shown on the display, and the Main
Menu indicates STAY ON and POWER OFF.
1. STAY ON Button ___________________________________________________ PRESS.
2. Plan to land at nearest suitable airport.
•
The system is operating on the Backup Battery.
•
The system will continue to operate normally until the Backup Battery is depleted.
•
There is no indicator for Backup Battery power or time remaining. A fully charged
Backup Battery provides 45 minutes of operation at a minimum.
Engine Monitoring System Failure
CONDITION:
Red X replaces all engine and fuel indications.
1. Control engine power by sound and control lever position. Monitor engine
performance using airspeed and vertical speed.
2. Plan to land at nearest suitable airport.
GPS X Fail
CONDITION:
GPS X FAIL is shown on the display. ("X" being the configured GPS source
(1, 2, 3, etc.)).
•
The GPS position source has failed.
•
The system is operating on the next available GPS position source.