SkyView
Airplane Flight Manual Supplement, Rev N,
10/23/2020
Page | 4-7
VHF COM Radio
The optional COM Radio Control Panel (see
) tunes frequencies by airport and station
type and allows the simultaneous reception of two frequencies, referred to as Dual Mode. To
use the radio:
1.
Press the APT button and use the knob to scroll through nearby airports.
2.
Press the knob to select an airport.
3.
TWR, ATIS, GND, and ATC will now select appropriate frequencies for the selected
airport.
4.
Press the knob to toggle the selected active and standby frequencies.
5.
Press and hold the knob to monitor both active and standby frequencies (i.e., Dual
Mode). The active frequency will have priority.
6.
To exit Dual Mode, push and hold the knob again, or press DUAL on the Radio Menu.
7.
Adjust frequencies with the labeled buttons or manually with the dual concentric knob.
Figure 4: COM Control Panel (Horizontal and Vertical Configurations)
