SkyView
Airplane Flight Manual Supplement, Rev N,
10/23/2020
Page | 7-5
WARNING ALERTS
VISUAL
INDICATION
AURAL
INDICATION
CONDITION
PRE-FLIGHT
ACTION
IN-FLIGHT
ACTION
(None)
"GEAR
OVERSPEED"
The value configured
for V
LE
has been
exceeded.
No action.
Take command to
manually decrease
airplane's speed
until the landing gear
has been fully
retracted.
(None)
"OVER GEES"
The G Meter has
entered the
configured Red
range
No action.
Reduce loads acting
on airplane using
pitch and power as
appropriate.
(None)
"OVERSPEED"
The value configured
for V
NE
has been
exceeded.
No action.
Take command to
manually decrease
airplane's speed
below
V
NE
ADAHRS CAL
CORRUPT
"WARNING"
The calibration of the
ADAHRS is corrupt.
Do not fly.
Monitor Standby
Display System.
ADAHRS
INTERNAL ERROR
"WARNING"
System sensor tests
performed on
ADAHRS failed.
Do not fly.
Monitor Standby
Display System.
ADAHRS FAIL
"WARNING"
SkyView HDX has
detected a problem
with the ADAHRS
module.
Do not fly.
SkyView PDF has
failed.
Monitor Standby
Display System.
ARINC-429
OFFLINE
"WARNING"
The SV-ARINC-429
module is not
communicating with
the SkyView display
unit (if installed).
Do not fly if flight
requires external
navigation sources.
SkyView will not
display navigation
from external
sources. Use
internal source, or
follow navigation
information on
external devices.
CHT "X" HIGH
"CYLINDER HEAD
TEMPERATURE"
CHT indicator for
identified sensor has
entered configured
Red High range.
Refer to Airplane
Flight Manual
Refer to Airplane
Flight Manual
CHT "X" LOW
"CYLINDER HEAD
TEMPERATURE"
CHT indicator for
identified sensor has
entered configured
Red Low range.
Refer to Airplane
Flight Manual
Refer to Airplane
Flight Manual