Page | 7-14
SkyView
Airplane Flight Manual Supplement, Rev N,
10/23/2020
CAUTION ALERTS
VISUAL
INDICATION
AURAL
INDICATION
CONDITION
PRE-FLIGHT
ACTION
IN-FLIGHT
ACTION
POSITION SOURCE
'X' FAIL
"CAUTION"
The identified
position source has
failed.
Verify that all
Navigation
Equipment is
powered ON.
If message persists,
navigate using other
appropriate
methods.
Verify that all
Navigation
Equipment is
powered ON.
If message persists,
navigate using other
appropriate
methods.
XPNDR ALT
ENCODER FAIL
"CAUTION"
The Transponder is
not communicating
with the altitude
source.
If Mode C Altitude
Encoding is
required, do not fly.
Advise ATC,
continue to
destination.
XPNDR FAIL
"CAUTION"
Transponder has
failed.
If Transponder is
required, do not fly.
Advise ATC,
continue to
destination.
XPNDR HEX CODE
NOT SET
"CAUTION"
Transponder hex
code is not entered
in SkyView display
units.
If Transponder is
required, do not fly.
Enter Transponder
hex code in SETUP
MENU >
TRANSPONDER
SETUP.
Advise ATC,
continue to
destination.
AP DISCONNECT
BROKEN
"CAUTION"
The Autopilot
disconnect monitor
has detected a
wiring fault.
Turn Autopilot power
OFF.
Autopilot is disabled
and must not be
used until fault has
been corrected.
Turn Autopilot power
OFF.
Do not use Autopilot
for remainder of
flight.
AP DISCONNECT
STUCK
"CAUTION"
The Autopilot
disconnect monitor
has detected a
wiring fault.
Turn Autopilot power
OFF.
Autopilot is disabled
and must not be
used until fault has
been corrected.
Turn Autopilot power
OFF.
Do not use Autopilot
for remainder of
flight.
AP PANEL
OFFLINE
"CAUTION"
Autopilot control
panel is not
communicating with
SkyView.
Autopilot control
panel
unavailable.
Use SkyView
Control Menu.
Autopilot control
panel
unavailable.
Use SkyView
Control Menu.
