Page | 7-22
SkyView
Airplane Flight Manual Supplement, Rev N,
10/23/2020
Engine Monitoring
The optional SkyView HDX Engine Monitoring System (EMS) provides engine and airplane
system information to the pilot.
EMS information can be presented on a SkyView HDX display in three different size formats,
depending upon owner/pilot preference or requirements of the airplane:
•
100% display page
•
50% display page
•
Bottom Band
During initial system setup, SkyView HDX is configured to indicate the limitations described in
the Airplane's Flight Manual (AFM). The only colors used to express these limitations are:
•
RED: Do not exceed
•
YELLOW: Caution range
•
GREEN: Normal Operating range
For twin-engine airplanes, SkyView HDX is configured to provide EMS information as follows:
•
During takeoffs and landings, a secondary (non-PFD) display unit must always present
EMS information in either 100% or 50% display page layout with no exceptions.
•
During normal flight operations a secondary (non-PFD) display is configured to present
EMS information in either 100% or 50% display page layout, with the following
exception:
▪
If the pilot selects to present the Map on 50% display page instead of EMS information,
then minimum required EMS information (i.e., fuel level, manifold pressure, and
condensed engine health indications) must be presented on the Bottom Band.
To present the minimum required EMS information on the Bottom Band,
the pilot needs to turn on the Bottom Band from the Main Menu (i.e.,
press DISPLAY > SETUP > ENGINE BOTTOM BAND).