SkyView SE
Pilot’s User Guide
- Revision B
3-1
3.
SV-D600 and SV-D900 Operation
After reading this chapter, you should be familiar with basic SkyView SE display operation. For
details regarding specific procedures (e.g., adjusting the barometer), refer to the PFD and EMS
operation chapters.
The SkyView SE SV-D600 and SV-D900 displays are identical in functionality and
presentation. The only difference is in the size and resolution of the screen.
Screen Synchronization
If you have multiple SkyView SE displays in your aircraft, the system will synchronize important
information between them. Actions such as setting baro, bugs, engaging the autopilot, or
acknowledging warnings only need to be performed on one display (or control panel) to be
reflected across the system.
Some settings such as screen layout are not synchronized on purpose. Firmware sensor
configuration file (.sfg) updates must also be done to each screen individually. The Aviation
database (which provides airport frequency information to the SV-COM radio) may or may not
synchronize, depending on whether the displays are connected together via Ethernet.
Reference the SkyView / SkyView SE System Installation Guide for more information on this
topic.
Display Bezel Layout
Figure 1 illustrates the front of an SV-D900 display and its important parts.
