Messages and Alerts
SkyView SE
Pilot’s User Guide
- Revision B
9-11
Spoken Alert (if
configured)
Message Displayed
in Message
Window
Notification
Area Alert
(severity)
Description
“Check Gear”
None
n/a
The aircraft is configured as a
Retractable gear, and the Landing
Gear is UP and the aircraft is
descending through the
configured minimum warning
speed.
“Gear Overspeed”
None
n/a
The aircraft is configured as either
a retractable or amphibious gear,
the landing gear is not UP, and the
airspeed is exceeding the
configured maximum gear down
speed.
“Gear is Up for Water
Landing”
None
n/a
The aircraft is configured as an
amphibious gear capability of
runway landings, and the gear is
in the UP state and the airspeed is
descending through the
configured minimum warning
speed.
“Gear is
Down for Runway
Landing”
None
n/a
The aircraft is configured as an
amphibious gear capability of
runway landings, and the gear is
in the DOWN state and the
airspeed is descending through
the configured minimum warning
speed.
Table 8
–
Messages, Alerts, and Audio Alert Details
STANDBY NETWORK ERROR Explained
The SkyView Network that connects your ADAHRS(s), EMS module, Autopilot servos, ARINC
module, and display are designed with fully redundant data pathways. When the STANDBY
NETWORK ERROR alert is displayed, SkyView SE is telling you that SkyView Network no longer
has a backup or redundant data pathway to fall back on should the primary data path fail. You
should treat this error similarly to the way you would treat the failure of a single ADAHRS in a
system that is equipped with two of them: There is little you can do to troubleshoot such an
issue in flight, should it occur. However, you should exercise the same precautions you would
exercise if you did not have backup flight instruments. If you are flying in IMC, especially, you
should consider making a precautionary landing as soon as possible. Since a STANDBY
NETWORK ERROR may be either a discrete single failure (breakage of a single wire) or indicative
of a more serious failure in progress (an entire wire bundle that is slowly fraying against
