![background image](http://html1.mh-extra.com/html/dynon-avionics/skyview-sv-d1000/skyview-sv-d1000_user-manual_2550919108.webp)
SV-MAP-270 Navigation Mapping Software
7-40
SkyView Pilot’s User Guide - Revision M
TRN TOO STEEP: Displayed when the required bank to complete the upcoming turn as
depicted on the map is excessive.
Figure 94 - Flight Plan Alert Messages
Activating a Flight Plan
Press the ACTIVATE button to activate your Flight Plan routing. Guidance will be provided
directly to the first waypoint in the Flight Plan and along each leg in the Flight Plan thereafter.
Guidance is visible for each leg on the HSI if GPS
0
is selected as the NAVSRC.
To go directly to a waypoint other than the first, go into the Flight Plan menu, scroll to the
waypoint you want to navigate to, press FPL MENU, select
WAYPOINT and confirm.
Guidance will be provided directly to the selected waypoint and to the remaining legs in the
Flight Plan after that. Similarly, use the ACTIVATE LEG option in the FPL MENU to skip to the leg
that ends with the highlighted waypoints. In contrast to the
WAYPOINT option, ACTIVATE
LEG does not use your aircraft’s current position to generate a Direct-To course. It instead
displays course guidance according to the selected leg.
The following figure shows an active Flight Plan where the first leg is active and the aircraft is
partway between the first two waypoints of the Flight Plan and is on course. The route is
depicted on the Moving Map display and the course is displayed on the HSI. Since the aircraft is
on course, there is no deviation on the CDI needle on the HSI.