![background image](http://html1.mh-extra.com/html/dynon-avionics/skyview-sv-d1000/skyview-sv-d1000_user-manual_2550919044.webp)
PFD Operation
4-16
SkyView Pilot’s User Guide - Revision M
Figure 32 - ADAHRS Cross-Checking Disagreement
Once SkyView has annunciated a cross-check comparison problem, press COMPARE to see both
ADAHRS side-by side. The ADAHRS that was previously displayed on the PFD is labeled
“ACTIVE”, while the one that was not previously being displayed - but which was being used as
the cross-check reference – will be labeled as “STANDBY”. Additionally, the labels “PRIMARY”
and “ALTERNATE” designate which ADAHRS is normally displayed when both are in agreement
and neither is disabled.
Figure 33 - ADAHRS Cross-Check Comparison