J7886 D180 v1.1
Page 9 of 20
4.1.2 BARO – Changing Altimeter Setting
Set the primary altimeter to the correct
altitude (eg 110ft at YREN).
Take the pressure reading from the
altimeter.
Select the EFIS BARO option
When the BARO menu is displayed, the
value-setting box shows the current
altimeter setting. The DEC- and INC+
buttons change the altimeter setting by 1
mbar.
Press BACK and then EXIT to exit the EFIS
menu.
The atmospheric pressure reading is
displayed in the lower right of the screen.
NOTE
:
The altimeter reading may take a little time
to stabilise after being adjusted.