SV-MAP-270 Navigation Mapping Software
SkyView Classic Pilot’s User Guide –
Revision Z
7-28
SHOW AIRSPACES WITHIN is temporarily disabled while panning across the map.
Traffic
When a device that can receive traffic information is installed and configured, traffic can be
displayed on the Map Page to improve situational awareness. See the SkyView System
Installation Guide for details on how to turn the display of traffic on and off.
Figure 106
-
Traffic Display on Map Page
SkyView can receive traffic information from a variety of devices. These currently include the
SV-ADSB-470/472 (US Only), TIS traffic supplied by the SV-XPNDR-26X or Garmin GTX
330/330ES Transponders, passive traffic from the Zaon XRX, FLARM (predominantly in Europe)
and the NavWorx ADS-B receivers.
Traffic is displayed on the Map Page in the location that it is reported to be in by the connected
traffic device.
Traffic information is informational only, and does not relieve the pilot-in-command
of their responsibility to see and avoid traffic.
Traffic is displayed as reported by the device sending it to SkyView. The precision
and accuracy of the location of traffic targets may vary from device to device, and
this may impact how accurately the position is represented on the SkyView display.
For example: TIS traffic updates, such as those received by the SV-XPNDR-26X, may
be anywhere from 2-12 seconds old due to radar latency and other technical