SV-D700, SV-D1000 and SV-D1000T Operation
SkyView Classic Pilot’s User Guide –
Revision Z
4-16
Figure 32
-
HSI Bearing 2 Pointer
Figure 33
-
Bearing 2 Pointer with Distance
These arrows show you the bearing directly to a radio station or waypoint
–
in other words, the
track that you would need to fly to go directly to it. BRG 1 is depicted with a single arrow head
when displayed on the HSI display. BRG 2 has a double arrow head. There is also a textual
information item for each bearing pointer that describes its source (e.g. SKYVIEW, NAV1, etc.)
and the distance from that source in available. Distance is only shown when only one bearing
source is selected. Each of the bearing pointers can be cycled between all available bearing
sources by pressing BRG 1 or BRG2 in the PFD Menu.
Note that some radios, such as the Garmin SL30, provide information about standby
frequencies that can be loaded into bearing pointer locations. These are only available for
standby VORs that are within range. They are labeled as SBY bearing pointers.
NAV radios tuned to a LOC/ILS frequency do not provide bearing information due to the nature
of the localizer radio signal.
Glideslope/VNAV Indicator
Figure 34
-
HSI Glide Slope
This only appears when tuned to an ILS or a GPS with vertical navigation output. When
displaying an ILS glideslope, full deflection is 0.5 degrees.
