Page | 14
SkyView
HDX System Configuration Manual; Beechcraft Bonanza P35 - V35B, Revision A
3.4.2 Flight Angle Pitch Adjust
This page allows you to adjust the displayed pitch of the waterline symbol (aircraft reference on
the attitude indicator) to compensate for the aircraft’s attitude in level flight. That attitude can
change depending on aircraft loading. This setting is not intended to compensate for an
ADAHRS module that is not installed correctly.
3.4.3 Airspeed Limitations
Enter this menu to configure the V-speeds and specify optimal flight parameters, such as the
best angle of climb speed, the best rate of climb speed, and the optimum maneuvering speed.
These speeds will generate markers and color ranges on the speed tape.
Configure the Airspeed Limitations according to speeds provided in the Aircraft Flight Manual
(AFM) that came with your airplane, or the Aircraft Flight Manual Supplement(s) (AFMS) that
came with any STC modifications that have been made to your aircraft. See
example.
Figure 10 Airspeed Limitations Configuration
3.4.4 Vertical Speed Scale
Enter this page to select configuration options of the vertical speed tape's scale. Configure as
desired.
3.4.5 G Meter
Enter this page to configure G values that will cause the G Meter to be automatically displayed
when exceeded; to set the yellow/red cautionary color ranges of the G meter; and whether the
max/min recorded G’s are reset at each SkyView boot-up. Configure the G meter as desired.
3.4.6 Flight Path Marker
Enter this page to enable/disable display of the flight path marker. Configure the Flight Path
marker as desired. Dynon recommends that you enable the Flight Path Marker as it is a valuable
safety enhancing tool.
Summary of Contents for SkyView HDX System
Page 2: ......