Page | 16
SkyView
HDX System Configuration Manual; Beechcraft Bonanza P35 - V35B, Revision A
3.4.13 Baro Mismatch Warning
Enables / disables a warning message when the current SkyView BARO setting and nearest
valid ADS-B METARS report barometric pressure are significantly different. Configure the Baro
Mismatch as desired.
3.5 EMS Setup Menu Configuration
This menu contains menus and pages related to Engine Monitoring System and the SV-EMS-
220 EMS module, if installed:
•
ENGINE INFORMATION
•
SENSOR INPUT MAPPING
•
SCREEN LAYOUT EDITOR
•
SENSOR DEBUG DATA
3.5.1 EMS Configuration File Download
As all the above menus have specific configuration requirements in order to create the certified
engine presentation, Dynon provided configuration files have been created and are stored in the
CONFIGURATION FILES folder that will configure Engine Monitoring System (EMS) to appear
as it has been certified to appear by the FAA. These files will also configure the Autopilot System
settings to be as certified:
•
103738-000 - Rev A - SkyView HDX System Configuration - Bonanza P35-V35B.dfg
This file is meant to be loaded into Beechcraft models P35 through V35B Bonanza.
It is imperative that, for this file to work, the airplane be wired in accordance with the 103488-
000 - REV A - WIRING DIAGRAM TYPICAL HDX DUAL DISPLAY document.
3.6 MAP Setup Menu Configuration
This menu contains menus and pages related to MAP page and data sources.
3.6.1 Terrain Warning Colors
Sets whether Red and Yellow terrain warning are provided on the Map Page. Configure the
Terrain Warning Colors as desired.
3.7 Autopilot Setup Menu Configuration
This menu configures various aspects of the Dynon Avionics Autopilot system, if autopilot servos
are installed:
•
STATUS
•
AUTOPILOT CONTROLS
•
ROLL AXIS
•
PITCH AXIS
•
FLIGHT DIRECTOR
•
GO AROUND MODE
Summary of Contents for SkyView HDX System
Page 2: ......
