SkyView
HDX System Configuration Manual; Beechcraft Bonanza P35 - V35B, Revision A
Page | 21
3.9 Traffic Setup Menu Configuration
The Traffic Setup Menu configures how traffic is displayed on SkyView if the SV-ADSB-472
module is installed. Configure the Traffic Setup Menu as desired.
3.10 COM Radio Setup Menu Configuration
The COM Radio Setup menu adjusts the squelch levels, sidetone audio levels, and MIC gain.
Adjust these settings according to the SkyView HDX System Installation Manual.
3.11 Hardware Calibration Menu Configuration
This menu contains links to the following sub-menus:
•
ADAHRS CALIBRATION
•
EMS CALIBRATION
•
AP SERVO CALIBRATION
•
TRIM MOTOR CONFIGURATION
3.11.1 ADAHRS Calibration
Enter this menu to make altitude adjustments (e.g., baro and altitude offset) and access the
compass and AOA calibration wizards. Refer to SkyView HDX System Installation Manual for
instructions on how to accomplish these calibrations.
3.11.2 EMS Calibration
Enter this menu for EMS sensor calibration. You will have options to calibrate fuel tanks and
position potentiometers that have been mapped in the Sensor Input Mapping Wizard. Calibration
wizards contain onscreen instructions. Refer to SkyView HDX System Installation Manual for
instructions on how to accomplish these calibrations.
3.11.3 AP Servo Calibration
Enter this menu for autopilot servo calibration. Refer to SkyView HDX System Servo Installation
Manual for instructions on how to accomplish these calibrations.
3.11.4 Trim Motor Configuration
Electric trim is not currently supported for certified aircraft.
Summary of Contents for SkyView HDX System
Page 2: ......
