dyras LR-140, Instruction Manual

LR-140

8

•  Turn on the device and place it on the fabric. Use gentle circular movements to remove the lint. Do not press 

heavily on the fabric as this may cause damage. The manufacturer is not liable for damage caused by using 
too much force.

•  Always turn the device off when you’ve finished using it, even if you’re only pausing for a short while.

maINtENaNCE aND CLEaNINg 

Warning!  Always turn the device off before you attempt to clean it. 

Very important!  Never immerse the device in water or hold it under running water.

•  Carefully remove the lint compartment by pulling it from the device. Empty it, then replace it.
•  Pull the cutting adjustment mechanism off the device. Now dismantle the device by turning the edge of the 

shaver screen anti-clockwise. Avoid touching the metal screen itself. Gently pull the cutting blade unit from 
the drive shaft. Avoid touching the blades. Use a brush to remove any lint from the shaft and the blades. 
Carefully remove any threads tangled around the shaft with a pair of scissors. Next, reassemble the device by 
placing the blades on the shaft. The blades will only fit in one position. Replace the shaver screen by turning 
it in a clockwise direction, then replace the cutting adjustment mechanism.

•  Clean the outside cover of the appliance with a damp, soft, lint-free cloth and then wipe the cleaned 

surfaces with a dry lint-free cloth. Take care not to allow any moisture inside the cover. Let the appliance dry 
completely before re-using or storing it.

•  When cleaning the appliance, never use solvent (acetone, benzole, petrol, alcohol, etc.) as these may solve 

the casing material, or the internal parts of the appliance if they get into. Do not use cleaning agents with 

coarse or grinding effect.

•  Make sure the casing is completely dry before using the device again.

QUaLIty CERtIfICatIoN 

We certify that the dyras LR-140 lint remover has the following technical specifications:

Type:  

LR-140

Description:  

lint remover

Supply voltage:  

two 1.5V batteries (LR6/AA size)

Noise emission:  

L

WA

 = 80 dB

Manufacturer:  

The Global Electric Factory Inc

.

We are continuously developing our products to keep them up-to-date, which means the technical data of our appliances may change without 

any prior notice. Errors and omissions excepted.