Constant, commercial use may cause:
- premature structural wear-and-tear of the equipment, for example, damage to and early wear
out of the engine due to overheating and abrasion resulting from permanent operation,
- abrasion and wear out of the control unit buttons.
Storing the appliance in cold or frosty environment may cause:
- damage to the plastic and rubber components; if they become fragile, this may result
in a safety risk.
- oxidation resulting from condensation, and corrosion of the metal components.
Direct and indirect heat (e.g. being too close to an oven or a heating appliance) can cause:
- damage, deformation, softening or melting of plastic or rubber parts and casing elements, or
deterioration of electrical insulation.
Following the operating instructions and avoiding any of the conditions listed above will help you
increase the lifespan of the appliance. The manufacturer is not responsible if the appliance is stored
inappropriately or contrary to these instructions. You are recommended to have the appliance
serviced regularly by an authorised engineer to keep it working for as long as possible.
Keep your environment clean. Don't dispose of this equipment with other solid consumer wastes
as it may seriously damage the environment, including both wildlife and human health. At the
end of the product life, please deposit this equipment at a waste collection point especially for
electric appliances. Take care to properly dispose of the electricity supply adapter of the
equipment as it is also electronic waste.
You may wish to contact the retailer or the manufacturer if you are unable to find convenient local
recycling facilities as they have some legal responsibilities for recycling electrical products.
Please keep this instruction manual. If you give the appliance to anyone else,
you must give them this instruction manual, too!
MAIN COMPONENTS
1. Massage
mattress
2. Fixing bands (not illustrated in the picture)
3. Control
unit
4. Power button (POWER)
5. Mode changing button (MODE)
6. Heating button (HEAT)
7. Network supply adapter
8. Cigar lighter connection adapter
EN
MASC-606
7
•
Never use an appliance or accessory that the manufacturer did not supply with or propose for use with the
appliance. The use of such appliances might lead to accidents or irregular function.
•
When storing the product, take care not to expose the mattress to permanent direct sunshine, as its material
or the control unit may fade, or become discoloured due to sunshine. Exposing the mattress to permanent
direct sunshine may also cause faulty operation.
•
Don't use the appliance in the presence of explosive or inflammable gases, vapours or liquids.
•
Please avoid using the appliance in any place where it would be subjected to high temperatures, low
temperatures, physical shocks or vibration. The appliance is designed to be operated and stored in a situation
where temperatures are b5° and +40° Celsius. Do not use the appliance in a wet or humid
environment.
•
You must not disassemble the appliance, remove its cover or to try to repair it. Ignoring this advice could
cause a serious accident. There are no parts in the appliance that can be repaired at home or used for any
other purpose. Never operate the appliance with a damaged mains cable or connector. Do not use the
appliance if it fails to work normally or if it has been dropped or damaged. If the appliance becomes faulty
for any reason or if any moisture is allowed inside, take it to an authorised service engineer for checking and
repair. Only service engineers who have been trained and approved should repair the appliance. The
manufacturer cannot take any responsibility for unauthorised repairs or for any circumstances resulting from
not following the instructions.
Dear Customer,
All electrical and mechanical equipment needs to be cared for appropriately. It’s important to note
that using or storing the appliance in certain conditions may adversely affect its lifespan and
functionality. Always protect the appliance from the conditions listed below.
Using or storing the appliance in a wet, humid or damp environment can cause:
- deterioration and premature aging of the cover and electric insulation of the appliance,
- premature wearing and aging of the plastic and rubber components,
- rust and corrosion affecting electrical components and metal parts.
Using the appliance in a dusty environment or in the kitchen (where the air may be contaminated
with vapours from cooking oil or grease) can cause:
- greasy dust coatings on the mechanical and electrical elements and the casing of the appliance,
which could result in electrical contact failure or even complete breakdown, and could also
damage the plastic and rubber elements.
The effects of direct sunlight on the appliance can include:
- accelerated deterioration of the appliance casing and its plastic and rubber components,
damage to strength and other structural features. The appliance's surface may become porous
and fragile, which may result in a safety risk.
MASC-606
6
User'sManual for MASC-606:User's Manual for MASC-606 2010.11.30. 15:51 Page 6
