helpline manual
20
Undo fasteners and remove the post
filter cover.
Release the locking tabs on the hose
retaining bracket.
Machine cutting out: thermal cut-out
If the customer is advising that the main vacuum motor power has cut-out*, complete the checks below.
*Cutting out is when the machine loses power whilst in use. If the machine becomes blocked, it may overheat and will stop due to
a thermal cut-out (fitted to the motor). The customer should follow the simple blockage checks below and allow a minimum of 30
minutes before re-using their machine.
Unplug machine. Separate extension
tube from floor tool by pressing the
release button.
Check floor tool for blockages.
Separate the wand and hose. Check
the wand for blockages.
Firmly remove the hose from the inlet
and check for blockages.
Remove the cyclone and bin assembly.
Check bin and cyclone for blockages
or obstructions. Open bin base and
check FDC for blockages.
2
3
6
4
9
7
8
1
Separate the wand and extension
tube. Check the extension tube for
blockages.
5