DEVICE SYNCING
To connect the amplifier to your device:
1.
Ensure the Bluetooth function on your mobile device is set to ‘ON’
2.
Ensure the amplifier is plugged in
3.
The amplifier should now be discoverable by your mobile device (you may need to scan for new
devices)
4.
The amplifier will be shown as B410BL, to sync, select the device and enter the password 012345
PAT TESTING
When used in a workplace, this product must be safety-tested yearly by a qualified electrician (PAT Tested)
in order to comply with the Electricity at Work Regulations. If hired out, it must be PAT tested prior to each
hire. We recommend that it is PAT tested regularly when used in a domestic environment.
DISPOSAL AND RECYCLING
You must not dispose of this appliance with domestic household waste. Most local authorities have specific
collection systems for appliances and disposal is free of charge to the end-user. When replacing an existing
appliance with a similar new appliance, your retailer may take the old appliance for disposal.
TECHNICAL SPECIFICATION
Dimensions
200x200x79mm
Max Power
80W
Impedance
8Ω
Sensitivity
88Db
Frequency
Response
80-20,000Hz
CLEANING
Disconnect the unit from the mains power supply before cleaning any of the components
Use a dry, soft cloth only to clean the units
Do not use detergents or abrasive cleaners
SERVICE WARRANTY
Electrovision guarantees the product free from defects in materials and workmanship for a period of one
year. Should this unit be operated under conditions other than those recommended, at voltages other than
the voltage indicated on the unit, or any attempts made to service or modify the unit, then the warranty
will be rendered void. The product you buy may sometimes differ slightly from illustrations. This warranty
is in addition to, and does not affect, your statutory rights.
Electrovision Ltd.
Lancots Lane
Sutton Oak
St. Helens
Merseyside
WA9 3EX
www.Electrovision.co.uk
