Manual for Power Pack compatible for Yamaha* PW Series drive system
* Yamaha is a trademark of the YAMAHA CORPORATION
Page
3
of
12
CE declaration of conformity
The evaluation of the device was carried out by European harmonized directives.
You therefore have a product that is related to it’s construction meets the safety
objectives of the European Community to the safe operation of equipment. The
detailed CE declaration of conformity can be obtained from our service center.
Technical information
Li-Ionen battery
17,1 Ah / 624 Wh 20,7 Ah / 745 Wh
Nominal voltage
36 V
36 V
Nominal capacity
17,1 Ah
20,7 Ah
Energy
624 Wh
745 Wh
Operating
temperature
-10 up to 60°C
-10 up to 60°C
Charge temperature
0 up to 45°C
0 up to 45°C
Storing temperature
~ 17°C
~ 17°C
Weight
approx. 3,5 kg
approx. 3,5 kg
Safety class
dust- and splash water approved
Care and storage
- Use only a soft cloth and a little water or a neutral detergent for cleaning
- Never clean with a high pressure or steam cleaner!
- Do not immerse in any liquids!
- Do not use any cleaning agents as gasoline, alcohol or other liquids.
- Abrasive cleaning agents can lead to detachment of the painting, discoloration,
deformation, scratechs or similar defects.
- Store your battery at room temperature (18° to 23° C).
- For longer periods, store it at temperatures around 17° C.
- Humidity should be in the range of 0 to 80 %.
- Ideal charging state in not use is about 70 % charged capacity.
- Check the state of charge by prolonged non-use regularly and charge your battery if
necessary.
Accessories
- E-Bike Vision fast charger for power packs with 36 V and a charge current of 7A.
- E-Bike Vision charger for power packs with 36 V and a charge current of 4A.
Both chargers must be used with the following adaptor:
- E-Bike Vision charge adaptor for Power Pack comp. with Yamaha PW Series
