17
The Quattrolete can be assembled by your dealer or specialist store for delivery.
In case it has been delivered directly without assembly follow the following steps.
1. Open the box and check that all the components are in perfect condition. If not, please contact your dealer.
2. Remove the cardboard separating the handlebar from the main structure and lift the handlebar by loosening the lower knob. Tighten again.
3. With the help of someone else grabbing the front and rear handlebars, remove the Quattrolete from the box. If you do not have help cut the sides of
the box careful not to damage the structure.
4. Place the rotation axis of the seat at the base of the seat in the centre of the scooter. Screw to an average height.
5. Place the seat base inside the rotating shaft. You can rotate the seat by raising its side lever until it is frontally. Lift the seat up.
6. Insert both armrests into the side frames and tighten their knobs until they are in the desired position.
7. Place the basket on the front of the scooter matching both guides.
8. Insert the wrench into the handlebar cylinder and check that the test is carried out correctly without any problem.
ASSEMBLY AND DISASSEMBLY
