19
2. Stretch the knob to remove the locking pin.
3. Slide the tube inwards or outwards as desired.
4. Align the holes in the seat frame and those in the arm, re-insert the locking pin.
5. Tighten the knob.
To get on or off the scooter without turning the seat can raise the armrest on the side because it will go
down.
ADJUSTMENT OF THE SEAT HEIGHT
The seat can be placed at four different heights.
1. Remove the battery from its compartment so as not to damage it during operation.
2. Remove the seat from the support.
2. Remove the screw through the tube from the seat base.
3. Raise or lower the seat to the required height.
4. While raising the seat align the holes of the seat with those
of the seat base. To access the intermediate holes you can
rotate the seat 90º. The holes are arranged at different height
and angle alternately.
5. With the holes in the base and the tube aligned, re-insert the
bolt until it exits from the other end and tighten firmly.
6. Return battery and seat
FRONT TRANSPORT BASKET
Your scooter has a front transport basket that can be removed if you need it for storage.
Pull the basket up to remove it.
