24
Number of beeps
Problem
Act
(9)
Traffic controller. You may be trying to
place the battery while the key is inserted
or the engine controller may be in warm-up
protection mode.
Turn off the scooter for a few minutes to allow
the controller to cool down and re-insert the
key.
What to do if the scooter system looks “dead”?
Make sure the ignition key is in the “ON” position.
Check is fully charged.
Press the main fuse reset button.
Make sure the auto-off system is not activated at that time. Take out the key and re-enter it.
Check the fuse
Take out the fuse.
Check the fuse for a connection.
Insert a new fuse of the same type.
What to do if the battery does not charge?
Check that the battery fuse. Replace if necessary.
During the charging process, if the charge indicator never indicates full charge check the battery fuse.
Check that the connections of the charger are well inserted and in good condition.
If the battery fuse is constantly melting contact your dealer or technical service.
