6.
CONTROL PANEL
1.
Position Selection Knob (Winter, OFF/Reset, Summer Mode)
2.
CH Water Temperature Set Knob
3.
DHW Water Temperature Set Knob
4.
Malfunction Warning LED
6.1
POSITION SELECTION KNOB (WINTER, OFF/RESET, SUMMER MODE)
When this knob turns to left, device runs according to “
“ mode and ready to CH and DHW heating requests.
When this knob at middle position, device will be on OFF/standby mode. At that mode, frost protection is ready
to activate.
When device gave a fault; turn knob to OFF position and wait 3 second for fixing the fault and then turn previous
mode.
When this knob turns to left, device runs according to “
” mode and ready to only DHW heating requests.
6.2
CH WATER TEMPERATURE SET KNOB
CH water temperature can be set with using “
“ knob between 30 - 80°C.
6.3
DHW WATER TEMPERATURE SET KNOB
CH water temperature can be set with using “
“ knob between 35 - 64°C.
6.4
MALFUNCTION WARNING LED
This LED will be activated, when device gave a fault. At that way, user can notice fault easily.
4
1
3
2
Summary of Contents for GP11
Page 1: ...GP 11 13 16 20 24 kW HM HERMETIC MONOTERMIC COMBI BOILER SERVICE MANUAL...
Page 7: ...8 SERVICE PARAMETER LIST...
Page 8: ...9 OPERATION PARAMETERS...
Page 22: ......
