E-Collar Technologies Easy Educator EZ-904, Quick Start Manual

“I” Instant Stimulation Mode

“I” Instant Stimulation Mode
 The "I" mode is a patented feature which allows the stimulation to
increase gradually as determined by the user. The gradual introduction of
stimulation provides a more gentle sensation and removes the startling
effect sometimes associated with applying a constant level of stimulation.
The dog produces less cortisol and learns to avoid the higher levels by
responding quickly to the command. The user has the flexibility of
increasing the stimulation fast if the situation warrants a quick response
from the dog.

How Instant Stimulation “I” Mode Works

How Instant Stimulation “I” Mode Works
1. Change the mode of any S button to Continuous if not already
   programmed to “C” mode : The stimulation dial must be turned to
   “0” to enter the “I” mode.
2. To start the “I”, push the assigned Continuous button. The display will
   flash On to indicate it is on and ready to begin stimulation.
3. Turning the stimulation will now activate the stimulation at the setting
   of the dial and continue for 45 seconds.
   Returning to “0” will reset the 45 second safety timer.
4. If you do not rotate the dial for 45 seconds the “I” mode will turn off
   and the control button will need to be pushed again.
5. Pushing any of the other control buttons will turn off the “I” mode and
   therefore require the “I” mode control be pushed again to reactivate it.
6. Again, to exit the Instant Mode, press any control button or wait for
   45 seconds.

I Mode

12