2.2. OPERATING WARNINGS
• Shut the appliance down in the event of a breakdown or bad running.
• Pellets must not be fed manually into the burner.
• Accumulated un-burnt pellets in the burner after repeated failed ignitions must be
removed before re-lighting.
• Do not wash the inside of the heat exchanger with water.
• Do not wash the appliance with water. The water could get inside the unit and
damage the electrical insulation and cause electric shocks.
• Do not put any fuel, other than wood pellets, in the hopper .
• Install the appliance in a location which is suitable for fire-fighting, and equipped
with all services such as air and electricity supply and provision for discharging
combustion gases.
• If there is a fire in the flue pipe, extinguish the appliance, disconnect it from the
power supply and never open the door. Then contact the competent authorities.
• If the appliance is in storage, it should be in a place that is free of damp, and it
should not be exposed to extremes of temperature.
• It is inadvisable to base the appliance directly on a floor (if located indoors), and if
the floor is made of flammable material, it must be suitably insulated.
• Do not light the appliance with flammable materials if the ignition system breaks
down.
INFORMATION
• In case of any problems, get in touch with your dealer, or a qualified engineer
authorised by WES, and if a repair is necessary, insist on the use of original spare
parts.
• Use only the fuel recommended by WES (ENplus-A1) may be used with this
appliance.
• Periodically check and clean the smoke outlet ducts (connection to the flue pipe).
• Accumulated un-burnt pellets in the burner after repeated failed ignitions must be
removed before lighting.
• Always keep the cover of the fuel hopper closed.
• Keep this instruction manual carefully because it must stay with the appliance
throughout its working life. If the appliance is sold or transferred to another user,
always make sure that the booklet goes with the product.
• If it gets lost, ask WES or your authorised dealer for another copy.
2.3. GUARANTEE CONDITIONS
WES offers the following warranties on this appliance :
•
Leaks in the heat exchanger – 5 years
•
Faulty electrical components (motors, fan, controller) – 2 years
•
Pump, Ignition Element – 1 year
•
External Casing – 2 years – except corrosion due to scratches or damage.
from the date of first ignition of the appliance as proved by a valid Commissioning
Report which gives the name of the Installer / Commissioning Engineer and the
ECOMPACT Slim
Page 4
Warnings & Guarantee Conditions
© Wood Energy Solutions
woodenergysolutions.co.uk
Summary of Contents for 15
Page 2: ......
