background image

11

User Manual EE072 Humidity and Temperature Probe with Modbus RTU

6.4  Repairs

Repairs may be carried out by the manufacturer only. The attempt of unauthorized repair excludes any 

warranty claims.

6.5  Configuration Interface

The EE072 is ready to use and does not require any configuration by the user. The user can change 

the factory setup by using the Modbus configuration adapter (order code HA011018) and the EE-PCS 

Product Configuration Software. 

One can change the digital communication settings, perform a RH and T adjustment in the form of an 

offset or as a 2-point adjustment and set the air pressure at the operating point.

EE-PCS PRODUCT CONFIGURATION SOFTWARE

1.  Download the EE-PCS Product Configuration Software from 

www.epluse.com/configurator

 and  

  install it on the PC.

2.  Connect the E+E device to the PC using the appropriate configuration cable.

3.  Start the EE-PCS software.

4.  Follow the instructions on the EE-PCS opening page for scanning the ports and identifying the  

  connected device.

5.  Click on the desired setup or adjustment mode from the main EE-PCS menu on the left and follow  

  the online instructions of the EE-PCS.

PC

HA011018

6.6  RH / T Adjustment and Calibration

Definition

•  Adjustment 

the specimen is brought in line with the reference.

•  Calibration 

the specimen is compared with a reference and its deviation from the reference is documented. 

Humidity calibration and adjustment

Depending on the application and the requirements of certain industries, there might arise the need for 

periodical humidity calibration (comparison with a reference) or adjustment (bringing the device in line 

with a reference).

Calibration and adjustment at E+E Elektronik

Calibration and/or adjustment can be performed in the E+E Elektronik calibration laboratory. For  

information on the E+E capabilities in ISO or accredited calibration please see 

www.eplusecal.com

.

Calibration and adjustment by the user

Depending on the level of accuracy required, the humidity reference can be:

•  Humidity calibrator (e.g. Humor 20), please see 

www.epluse.com/humor20

.

•  Handheld device (e.g. Omniport 30), please see 

www.epluse.com/omniport30

.

•  Humidity standards (e.g. Humidity Calibration Kit), please see 

www.epluse.com/EE072

.

Summary of Contents for EE072














Reviews: