Montage Modell C, Modell H (abgesetzter Fühler)
Montagebohrungen und Abmessungen für Metall- bzw. Polycarbonatge-
häuse siehe Seite 7.
Messumformer der Serie EE23-xCx bzw. EE23-xHx sind Messumformer
mit einem abgesetzten Messfühler.
Einsatzbereich Fühler:
Modell C: -40...120°C
Modell H: -40...80°C
Einsatzbereich Elektronik:
-40...60°C
Montage des Messfühlers - Modell C (12mm):
Der Montageflansch aus Edelstahl (siehe Zubehör) ermöglicht eine einfa-
che Montage an der Messraum-Aussenwand und eine stufenlose
Verstellung der Eintauchtiefe.
Bei der Deckenmontage wird ein Tropfwasserschutz (siehe Zubehör) zum
Schutz des Fühlers und der Sensorelemente empfohlen!
Der Messfühler muss horizontal oder vertikal nach unten montiert sein.
Wenn möglich sollte bei jeder Montage ein Abtropfbogen gelegt werden.
Montage des Messfühlers - Modell H (5mm):
Inkl. Montagevorrichtung zur versteckten Montage des Miniaturfühlers
z.B: in Museen, Türzargen, usw.
Bohrungsdurchmesser: 13mm
Materialstärke: min. 3mm
i
8