User Manual EE360
Moisture in Oil Sensor | 19
Switch Window Mode
The switching behavior is determined by entering two switching points and two associated hysteresis values.
t
closed
open
closed
open
Normal state: Standard
Normal state: Standard
Terminal 1-2 / 4-5
Terminal 2-3 / 5-6
Switching point 2
Hysteresis 2
Switching point 1
Hysteresis 1
RH [%]
Fig. 11 Example window mode on both alarm outputs using
normal state standard
Additionally, detected errors are signaled at the alarm output.
Error Indication Mode
When error indication mode is selected, various errors will trigger the alarm output.
t
closed
open
Error occurs
No error
Terminal 5-6
Normal state: Inverted
Fig. 12 Example of error mode on relay 1 using normal state inverted.
PLEASE NOTE
An alarm output in this operation mode is used for error indication only (no combination with switching points
possible).
NO
NC
C
NC
6
NO
4
C
5
NC
3
NO
1
C
2
NO
NC
C
Standard
Inverted
REL 1
REL 2
RELA
Y 2
RELA
Y 1
For metal enclosure only
PROTECTIVE CONDUCTOR TERMINAL:-
Maximum wire cross section: 1.5 mm
2
Fig. 13 Alarm module (option AM2)
