4
User Manual EE600 Differential Pressure Sensor
1 General
This user manual serves for ensuring proper handling and optimal functioning of the device. The user
manual shall be read before commissioning the equipment and it shall be provided to all staff involved
in transport, installation, operation, maintenance and repair.
Please find this document and further product information on our website at
The user manual may not be used for the purposes of competition without the written consent of E+E
Elektronik® and may not be forwarded to third parties. Copies may be made for internal purposes. All
information, technical data and diagrams included in these instructions are based on the information
available at the time of writing.
Disclaimer
The manufacturer or his authorised agent can only be held liable in case of willful or gross negligence.
In any case, the scope of liability is limited to the corresponding amount of the order issued to the
manufacturer. The manufacturer assumes no liability for damages incurred due to failure to comply with
the applicable regulations, operating instructions or the operating conditions. Consequential damages
are excluded from the liability.
1.1 Explanation of Symbols
This symbol indicates safety information.
It is essential that all safety information is strictly observed. Failure to comply with this information can
lead to personal injuries or damage to property. E+E Elektronik® assumes no liability if this happens.
This symbol indicates instructions.
The instructions shall be observed in order to reach optimal performance of the device.
1.2 General Safety Instructions
Avoid any unnecessary mechanical stress and inappropriate use.
Installation, electrical connection, maintenance and commissioning shall be performed by qualified
personnel only.
Use the EE600 only as intended and observe all technical specs.
Do not blow into the pressure connections.
Connecting to EE600 a pressure beyond the measurement range according to the product
specification may permanently damage the device.
Do not use EE600 in explosive atmosphere or for measurement of aggressive gases.
Do not apply the nominal voltage to the output terminals.
1.2.1 Intended Use
The EE600 is dedicated for the highly accurate measurement of differential pressure. The multi-range
device is suitable for air as well as all non-f lammable and non-aggressive gases. The sensor can be
used between -20 °C (-4 °F) and +60 °C (+140 °F) and max. 95 %RH (non-condensing).
Please observe the mounting and installation instructions in chapter 4 Mounting and Installation. Check
the measuring range for the appropriate use and be aware of the maximum overload limit.
The manufacturer cannot be held responsible for damages as a result of incorrect handling, installation
and maintenance of the device.
Unauthorized modifications of the product lead to loss of all warranty claims. The device may only be
powered as described in this manual.
1.2.2 Mounting, Start-up and Operation
The EE600 differential pressure sensor has been produced under state of the art manufacturing
conditions, has been thoroughly tested and has left the factory fulfilling all safety criteria. The
manufacturer has taken all precautions to ensure safe operation of the device. The user must ensure
that the device is set up and installed in a manner that does not have a negative effect on its safe use.
The user is responsible for observing all applicable safety guidelines, local and international, with
