background image

GENERAL OPERATION

19

Zone Select

A zone is a group of up to any 16 conventional and SMARTNET/

SmartZone channels defined by dealer programming. Up to 16 zones can 
be programmed for a total of 16 x 16 or 256 channels. One use of zones 
may be to select groups of channels programmed for operation in 
different geographical areas or radio systems. If selectable zones have 
been programmed in your radio, consult your dealer for more information 
on how they are used. Zones are selected as follows:

1. Press the Zone option switch and the alias (name) of the current zone is 

flashed in the display. 

2. Use the number keys to enter the desired zone number or scroll through 

the available zones using the 

 and 

 keys.

3. Once the desired zone is displayed, press the ENT key or wait 4 

seconds.

Home Zone

The radio can be programmed with a home zone. Then when power 

is turned on, the radio can be programmed so that either the home or last 
selected zone is automatically selected. 

If the Home Zone option switch is programmed, it can be used to 

quickly select or change the home zone. To select the home zone, simply 
press this switch. Then to change the home zone to the currently selected 
zone, press and hold this switch until a tone sounds (approximately 1 
second). 

Time-Out Timer

The time-out timer disables the transmitter if it is keyed for longer 

than the programmed time. On each channel it can be programmed for 
times from 15 seconds up to 3 minutes, 45 seconds or disabled (not used). 
If the transmitter is keyed continuously for longer than the programmed 

Summary of Contents for 7700 Series





























































Reviews: