CONTROLS AND DISPLAY
12
Option Switches -
The five front panel option switches can be
programmed by your system operator to the functions listed below. Refer
to the section indicated for more information on a function. The keycap
usually indicates the function controlled by the switch.
A/D
- Scan list add/delete (see page 37)
CG -
Call Guard squelch disable (see page 52)
EMER -
Emergency switch (see page 26)
ENCPT -
Encryption on-off (see page 27)
FCN -
Function select (see following description)
HORN -
Horn alert on-off (see page 28)
MON -
Monitor mode on-off (see page 42)
AUX -
Option select (see page 29)
PRI -
Priority sampling on-off (see page 53)
SCAN -
Scan on-off (see page 35)
STLH (AUX) -
Stealth mode select (see page 31)
TA -
Talk-around on-off (see page 52)
(Blank) -
Not used (disabled)
FCN (Function) Switch -
This switch (if programmed) selects the
following functions:
Menu Mode Select - Press FCN twice (see page 32)
Home Sys/Grp Select - FCN/press Select switch (see page 28)
Conv Squelch Set - FCN/rotate Select switch (see page 18)
Transmit/Busy Indicator -
Indicates the following conditions:
Red
-
Transmitter keyed, normal power output
Orange
-
Transmitter keyed, power reduced because internal
temperature is high
Green
-
Busy conventional group (channel). Refer to “Conventional
Operation” on page 41 for more information.
Microphone Jack -
Connection point for the microphone.
Microphone Push-To-Talk (PTT) Switch (Not Shown) -
Push-button on
the microphone which is pressed to key the transmitter.
