MISCELLANEOUS
56
Multi-Net Telephone Call Tones
The following tones are generated by the Multi-Net equipment and
are heard when making a telephone, unique ID, or directed group special
call on a Multi-Net system.
Confirmation Tone -
This is a short tone that sounds when the number
just dialed has been accepted by the system.
Call Proceed Tone -
With Multi-Net directed group calls (see page 23),
ringing does not occur after the number is dialed. Instead, another short
tone sounds after the confirmation tone to indicate that the audio path is
complete and speaking can begin.
End Call Tone -
Three beeps which indicate that the end of the call has
been detected by the system.
Proceed Dialing Tone -
When placing a landside-to-mobile telephone
call (see page 25), the landside caller may enter a special number which
specifies the mobile being called. This tone indicates when that number
should be dialed.
LTR Telephone Call Tones
The following tones are generated by LTR interconnect equipment
and are heard when making LTR telephone calls. Therefore, if some other
type of interconnect equipment is being used, these tones may vary.
Reorder Tone -
Three beeps which indicate that the call has been termi-
nated by the system.
Return Time Warning Tone -
Two beeps which warn that you have not
transmitted for an extended period. If you do not transmit within 5
seconds, the call is automatically terminated by the system. The time
between transmissions is one of the parameters used by the system to
detect the end of a call when the # character is not sent.
