Draft 02 - Sep 1 2015
3-16
Viking Mobile Radio Operating Manual
General Operation
3
If it is set to Disabled or Response Only; when the Single Touch button is pressed and
held the radio will display “Disabled”, “RSPNS ONLY” (Standard Control Head), or
“Response Only” (Lightning Control Head)
4
Once the Unit Call has been sent, operation continues as normal for Unit Call.
5
The alias of the radio being called followed by “wait” will be displayed.
6
If the radio called does not answer, a time-out message is displayed. When this is
displayed any key on the radio exits the Unit Call.
7
To exit the call either press the Clear button or the Single Touch button assigned to Unit
Call.
To Answer a Unit Call Using Single Touch
1
When receiving a Unit Call, press and hold the Single Touch button assigned to Unit
Call.
2
Then press the PTT button to answer the Unit Call.
3
For the radio to receive, the Unit Call Usage in Armada under Systems(P25)
→
Lists
→
Call Settings must be set to Response Only, List Only, or Unlimited.
4
Once the received Unit Call is active, operation continues as normal for Unit Call.
5
The alias of the calling radio will be displayed.
6
To exit the call either press the Clear button or the Single Touch button assigned to Unit
Call.
3.2.2.6
P25 Call Alert
1
To send a Call Alert, press and hold the Single Touch button assigned to Call Alert.
2
For the radio to send the Call Alert, the Call Alert Usage in Armada under
Systems(P25)
→
Lists
→
Call Settings must be set to List Only or Unlimited.
3
Once the alert is sent, operation continues as normal for Call Alert.
4
After finishing either an Ack Received message or a No Ack message is displayed and
Call Alert is exited.
5
To exit before those messages either press the Clear button or the Single Touch button
assigned to Call Alert.
