Draft 02 - Sep 1 2015
Viking Mobile Radio Operating Manual
2-13
Controls & Display
2.4
Dual Control Configurations
The Viking mobile radio is available in two dual-control configurations, each with
different programming and setup requirements:
- Dash-mount radio with a remote mount control head
- Remote-mount radio with two remote control heads
Figure 2.13 Dash-Mount Radio with Remote Control Head
Figure 2.14 Remote-Mount Radio with Two Remote Control Heads
Note
All heads are shipped from factory set as masters. One of the heads needs to be
programmed as a slave to function correctly. Please refer to Section 2.4.4.
2.4.1
Remote Conversion Kit 250-5300-002
This kit provides the material required to convert an existing dash-mount mobile to a
remote-mount configuration. The kit includes:
- Blank faceplate for mobile unit
- Rear shroud for remote control head
- Remote control head mounting bracket
- Single remote accessory cable (part number 597-5357-706)
- 17 ft. remote control cable (part number 597-5357-775-02)