background image

15

EN

Limited Warranty

What this Warranty Covers

Horizon Hobby, Inc. (“Horizon”) warrants to the original 
purchaser that the product purchased (the “Product”) will 
be free from defects in materials and workmanship at the 
date of purchase. 

What is Not Covered

This warranty is not transferable and does not cover 
(i) cosmetic damage, (ii) damage due to acts of God, 
accident, misuse, abuse, negligence, commercial 
use, or due to improper use, installation, operation or 
maintenance, (iii) modifi cation of or to any part of the 
Product, (iv) attempted service by anyone other than 
a Horizon Hobby authorized service center, (v) Product 
not purchased from an authorized Horizon dealer, or 
(vi) Product not compliant with applicable technical 
regulations. 

OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON 
MAKES NO OTHER WARRANTY OR REPRESENTATION, AND 
HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, 
INCLUDING, WITHOUT LIMITATION, THE IMPLIED 
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE. THE 
PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE 
DETERMINED THAT THE PRODUCT WILL SUITABLY MEET 
THE REQUIREMENTS OF THE PURCHASER’S 
INTENDED USE. 

Purchaser’s Remedy

Horizon’s sole obligation and purchaser’s sole and 
exclusive remedy shall be that Horizon will, at its option, 
either (i) service, or (ii) replace, any Product determined 
by Horizon to be defective. Horizon reserves the right to 
inspect any and all Product(s) involved in a warranty claim. 
Service or replacement decisions are at the sole discretion 
of Horizon. Proof of purchase is required for all warranty 
claims.  SERVICE OR REPLACEMENT AS PROVIDED 
UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND 
EXCLUSIVE REMEDY. 

Limitation of Liability

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, 
INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF 
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY 
WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED 
IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT 
LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF 
HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF 
SUCH DAMAGES. Further, in no event shall the liability 
of Horizon exceed the individual price of the Product on 
which liability is asserted. As Horizon has no control over 
use, setup, fi nal assembly, modifi cation or misuse, no 
liability shall be assumed nor accepted for any resulting 
damage or injury. By the act of use, setup or assembly, the 
user accepts all resulting liability. If you as the purchaser 
or user are not prepared to accept the liability associated 
with the use of the Product, purchaser is advised to return 
the Product immediately in new and unused condition to 
the place of purchase.

Law

These terms are governed by Illinois law (without regard to 
confl ict of law principals).  This warranty gives you specifi c 
legal rights, and you may also have other rights which vary 
from state to state.  Horizon reserves the right to change 
or modify this warranty at any time without notice.

WARRANTY SERVICES
Questions, Assistance, and Services

Your local hobby store and/or place of purchase cannot 
provide warranty support or service. Once assembly, setup 

or use of the Product has been started, you must contact 
your local distributor or Horizon directly. This will enable 
Horizon to better answer your questions and service 
you in the event that you may need any assistance. For 
questions or assistance, please visit our website at www.
horizonhobby.com, submit a Product Support Inquiry, or 
call 877.504.0233 toll free to speak to a Product Support 
representative. 

Inspection or Services

If this Product needs to be inspected or serviced and is 
compliant in the country you live and use the Product in, 
please use the Horizon Online Service Request submission 
process found on our website or call Horizon to obtain a 
Return Merchandise Authorization (RMA) number. Pack 
the Product securely using a shipping carton. Please note 
that original boxes may be included, but are not designed 
to withstand the rigors of shipping without additional 
protection. Ship via a carrier that provides tracking and 
insurance for lost or damaged parcels, as Horizon is 
not responsible for merchandise until it arrives and is 
accepted at our facility. An Online Service Request is 
available at Horizon Hobby Service Center. If you do not 
have internet access, please contact Horizon Product 
Support to obtain a RMA number along with instructions 
for submitting your product for service. When calling 
Horizon, you will be asked to provide your complete name, 
street address, email address and phone number where 
you can be reached during business hours. When sending 
product into Horizon, please include your RMA number, 
a list of the included items, and a brief summary of the 
problem.  A copy of your original sales receipt must be 
included for warranty consideration. Be sure your name, 
address, and RMA number are clearly written on the 
outside of the shipping carton. 

NOTICE: Do not ship LiPo batteries to Horizon. If you 
have any issue with a LiPo battery, please contact the 
appropriate Horizon Product Support offi ce.

Warranty Requirements 

For Warranty consideration, you must include your 
original sales receipt verifying the proof-of-purchase 
date. 

Provided warranty conditions have been met, your 

Product will be serviced or replaced free of charge. 
Service or replacement decisions are at the sole 
discretion of Horizon.

Non-Warranty Service

Should your service not be covered by warranty, 
service will be completed and payment will be 
required without notifi cation or estimate of the 
expense unless the expense exceeds 50% of the retail 
purchase cost.

 By submitting the item for service you are 

agreeing to payment of the service without notifi cation. 
Service estimates are available upon request. You must 
include this request with your item submitted for service. 
Non-warranty service estimates will be billed a minimum 
of ½ hour of labor. In addition you will be billed for return 
freight. Horizon accepts money orders and cashier’s 
checks, as well as Visa, MasterCard, American Express, 
and Discover cards. By submitting any item to Horizon 
for service, you are agreeing to Horizon’s Terms and 
Conditions found on our website Horizon Hobby 
Service Center. 

NOTICE: Horizon service is limited to Product 
compliant in the country of use and ownership. If non-
compliant product is received by Horizon for service, it 
will be returned unserviced at the sole expense of 
the purchaser.

Summary of Contents for EDGE 540QQ 280




















Reviews: