background image

34

35

Warranty Inspection and Repairs

To receive warranty service, you must include your original sales receipt 

verifying the proof-of-purchase date. Provided warranty conditions have been 

met, your Product will be repaired or replaced free of charge. Repair or 

replacement decisions are at the sole discretion of Horizon Hobby.

Non-Warranty Repairs

Should your repair not be covered by warranty the repair will be completed 

and payment will be required without notification or estimate of the expense 

unless the expense exceeds 50% of the retail purchase cost. By submitting 

the item for repair you are agreeing to payment of the repair without 

notification. Repair estimates are available upon request. You must include 

this request with your repair. Non-warranty repair estimates will be billed a 

minimum of ½ hour of labor. In addition you will be billed for return freight. 

Please advise us of your preferred method of payment. Horizon accepts 

money orders and cashiers checks, as well as Visa, MasterCard, American 

Express, and Discover cards. If you choose to pay by credit card, please 

include your credit card number and expiration date. Any repair left unpaid 

or unclaimed after 90 days will be considered abandoned and will be 

disposed of accordingly. Please note: non-warranty repair is only available 

on electronics and model engines.

Electronics and engines requiring inspection or repair should be shipped to 

the following address:

Horizon Service Center 

4105 Fieldstone Road 

Champaign, Illinois 61822

United Kingdom:
Electronics and engines requiring inspection or repair should be shipped to 

the following address:
Horizon Hobby UK
Units 1-4 Ployters Rd
Staple Tye
Southern Way
Harlow
Essex CM18 7NS
United Kingdom

Please call +44 1279 641 097 or
sales@horizonhobby.co.uk with any questions or
concerns regarding this product or warranty.

Germany:
Electronics and engines requiring inspection or repair
should be shipped to the following address:

Horizon Technischer Service
Otto Hahn Str. 9a
25337 Elmshorn
Germany

Please call +49 4121 46199 66 or email service@horizonhobby.de with any 

questions or concerns regarding this product or warranty.

All other Products requiring warranty inspection or repair should be shipped 

to the following address:

Horizon Product Support 

4105 Fieldstone Road 

Champaign, Illinois 61822

Please call 877-504-0233 or e-mail us at productsupport@horizonhobby.com 

with any questions or concerns regarding this product or warranty. 

Product Registration

Register your product online at:  www.e-fliterc.com/register/

Summary of Contents for EFLH2200




















Reviews: