16
E-flite Ultimate 20-300 Assembly Manual
2. Slide the stabilizer into the slot at the rear of the
fuselage. Slide the stabilizer forward, then align it side-
to-side with the fuselage.
3. Measure from each wing tip to each stabilizer tip.
The distances on the right must match those on the left.
Reposition the stabilizer to achieve equal measurements.
A
A
A=A
4. Stand back and view the aircraft from the rear. The
stabilizer must be parallel to the bottom wing. It may be
necessary to lightly sand the opening in the fuselage for
the stabilizer to correct this alignment.
Position stabilizer parallel to bottom wing
