27
E-flite Ultimate 20-300 Assembly Manual
5. Secure a small square of hook and loop material
inside the fuselage. This is done to keep the strap that
secures the battery from falling into the fuselage.
6. Secure the battery inside the fuselage using the hook
and loop strap. Use a piece or two of hook and loop
material between the fuselage and battery to keep it from
moving around in flight.
7. Check the operation of the motor at this time. It should
rotate counterclockwise when viewed from the front of the
aircraft. If not, follow the instructions provided with your
speed control to correct the situation.
Note
: Never check the motor rotation on the bench
with the propeller installed. The plane could move and
cause serious injury. Always check the motor without the
propeller to avoid injury.
8. Attach the cowling to the fuselage using four 2mm
x 8mm machine screws and a #1 Phillips screwdriver.
Pieces of tubing have been installed in the fuselage side
to accept the screws.
