BATTERY AND CHARGER ACCESS
Battery Access Slot
Make sure the batter is properly seated against its housing in the frame. Insert the key into the lock on the top of the battery
head.. Turn the key to remove/lock the battery in the frame.
●
NOTE: The keys provided are ONLY used to lock and unlock the battery. Turning the key DOES NOT act as a ignition for
the battery or motor.
Battery ON/OFF Switch
Located on the side of the black battery cap is a red ON/OFF switch. When the battery is locked into the frame this switch is
accessible through the port on the left side of the frame.
●
On = Battery is powered on. Electric Assist LED Display is able to be turned on and the PAS, throttle, and USB port can all
be used.
●
OFF = Battery is completely powered off. Electric Assist LED Display will not turn on. PAS and throttle cannot be used. The
USB will not charge any plugged in devices.
USB Port
Located next to the ON/OFF switch on the battery cap is a USB port. When the battery is locked into the frame, the USB port is
accessible through the port on the left side of the frame. When the battery is turned on, USB port can be used to charge any device
with a USB compatible charger.
●
USB charging will use battery life. Be aware of battery level when charging with USB and operating bike simultaneously.