6
Other LCD Functions:
●
Trip Clearance: Press [mode] and [down] buttons simultaneously to clear trip distance
●
Distance Display: Short press [up] to switch between ride distance and total distance
●
Error Codes
○
04: Throttle no homing
○
05: Throttle Abnormality
○
06: Low Voltage Protection
○
07: Overvoltage Protection
○
08: Hail Sensor Abnormality
○
09: Phase Line Abnormality
○
10: Controller Overheat
○
11: Temperature Sensor in Controller Abnormality
○
12: Current Sensor Abnormality
○
21: Speed Sensor Abnormality
○
22: Communication Abnormality in BMS
■
NOTE: The display will return to normal only after a problem is fixed, and the bike will not turn on
before fixing the problem
2)
LCD #2
displays the following information: battery capacity, distance, distance unit, speed unit, push/cruise control,
error code, and power level. The display is equipped with a special 3-button unit: UP, DOWN, MODE. This operating button
suits both L/R hand.
ON/OFF
Long press MODE to turn the display on and supply power to the controller. To turn off the display, press and hold MODE to
shut off the power. If the bike is not used for more than 10 minutes, the display will turn off automatically.
Battery Indicator
When the battery is fully changed, the icon will show five full bars on the top left corner of the display. When the battery in low
on charge, the last bar will start flashing. Charge the battery as soon as possible.
Speed (including real time, max and average speed)
When the bike starts riding, the display will automatically show the current speed. Hold
UP
and the
display will show the MAX speed during this ride. Hold
UP
again and the display will show the AVG
speed during this ride. Hold
UP
again and the display will turn to the current speed display.
Summary of Contents for Gadis
Page 4: ...STRUCTURE OF YOUR E BIKE...
Page 5: ...SIZING...
