‐
70
‐
Click backup button, you can see an interface is shown as in Figure 4-32. Here
is for you to view information. You can view backup device name and its total
space and free space. The device includes CD -RW ,DVD burner, USB device,
flash disk, eSATA backup select backup device and then set channel, file start
time and end time. Click add button, system begins search. All matched files
are listed below. System automatically calculates the capacity needed and
remained. System only backup files with a
√
before channel name. You can
use Fn or cancel button to delete
√
after file serial number Click Start button,
system begins copy. At the same time, the backup button becomes stop button.
You can view the remaining time and process bar at the left bottom
When the system completes backup, you can see a dialogue box prompting
successful backup
File format: Click the file format; you can see there are two options:
DAV/ASF The file name format usually is: Channel Record type
+ Time. In the file name, the YDM
format is Y+M+D+H+M+S. File extension name is .dav
Tips:
During backup process, you can click ESC to exit current interface for other
operation. The system will not terminate backup process.
Note:
When you click stop button during the burning process, the stop function
becomes activated immediately. For example, if there are ten files, when you
click stop system just backup five files, system only save the previous 5 files in
the device (But you can view ten file names).
3.3.6 Shut Down
select Shut Down, you can go to the following interface..