‐
81
‐
the number is, the strong the color is. This value has no
effect on the general brightness of the whole video. The
video color may become too strong if the value is too high.
For
4.4.2 Encode
The encode interface is shown as below
Please refer to the following sheet for detailed information.
Parameter
Function
Channel
Please select a channel from the dropdown list.
Video enable
Check the box here to enable extra stream video. This
item is enabled by default.
Code stream
type
It includes main stream, motion stream and alarm
stream. You can select different encode frame rates
form different recorded events. System supports active
control frame function (ACF). It allows you to record in
different frame rates. For example, you can use high
frame rate to record important events, record scheduled
event in lower frame rate and it allows you to set
different frame rates for motion detection record and
alarm record
Compression
The main bit stream supports H.264. The extra stream
supports H.264, MJPG.
Resolution
System supports various resolutions, you can select
from the dropdown list. Please note the option may vary
due to different series