H685 User Manual
E
‐
Lins
Technology
Co.,Limited
Tel:
+86
‐
755
‐
29230581
E
‐
mail:
sales@e
‐
lins.com
sales@szelins.com
www.szelins.com
www.e
‐
lins.com
Step 3) at the test PC, open the IE, and input
http://183.43.55.249:80
to enter the H685 router’s web.
Notes:
1) The H685 router’s web port default is 80. Some ISP block the port 80 because of some security. Then please
confirm the ISP the opened port, and change the web port for H685 router before remote visiting.
Please refer to
Chapter 3.3.14.1.1 Router web port
to change the web port.
2) If you cannot get a fixed public WAN IP, you can use H685 router’s DDNS feature. Refer to
chapter 3.3.14.1.3
DDNS settings
to configure.
Then you can input
http://ddns:port
to visit the H685 router’s web port.
5.5 WAN RJ45 Static (fixed IP) and Cellular Fail Over backup redundancy
Please connect the RJ45 WAN port and the upper Router LAN RJ45 port via RJ45 cable. The H685 WAN LED
should be on.
Step 1) log into the H685 router web.
Step 2) Internet Settings – Route Fail Over
