H685 User Manual
E
‐
Lins
Technology
Co.,Limited
Tel:
+86
‐
755
‐
29230581
E
‐
mail:
sales@e
‐
lins.com
sales@szelins.com
www.szelins.com
www.e
‐
lins.com
With the setting above, the H685 router checks signal every 20s, if all of 10 times with signal 0
quality, H685 Router will send Alarm via SMS. After the alarm, this feature will be locked, but H685
Router keeps checking signal quality every 20s, if continuous 8 times are with signal quality better
than 0, the alarm feature will be unlocked, then the alarm feature starts work again.
3.3.10 Link Backup (Route Redundancy)
Operation Mode
Active:
disable or enable the link redundancy
Back to Higher Primary When Possible:
If you tick this option, once the H685 Router work on backup link, whether it fails or not, it will
return to main link if main link turns to be okay.
If not tick this option, the H685 Router will not return to main link until the current link fails.
Link Priority Settings
WAN1: Cellular Wireless
WAN2: WiFi DHCP Wireless
WAN3: Wired XXX (XXX=DHCP, STATIC, PPPOE)
OFF
: Check
OFF Blank
to disable or uncheck to enable the link redundancy
Priority
:
High Priority, Middle Priority, Low Priority.
