E-Lins WAP100 Series Outdoor AP Quick Start
E
‐
Lins
Technology
Co.,Limited
Tel:
+86
(755)
33231620
E
‐
mail:
sales@szelins.com
sales@e
‐
lins.com
www.szelins.com
Enable Ping Watchdog:
Default is disabled. Check on box to enable.
IP Address To Ping:
Target IP address do ping test monitor.
Ping Interval:
Default is 5 seconds (minimum). This is Ping test duration.
Startup Delay:
Default is 60 seconds(minimum).
One time delay after device startup.
Failed Count To Reboot:
Default is 5. This is the number of ping failure count before
device kick in the reboot process.
4.6.2 Auto-Reboot
Auto-Reboot Mode:
Default is disabled. Select By Hour or By Time check.
This mode lets you preset a timer to automatically force a reboot.
Timer can in fixed number of hours or at a specified time of day.
By Hour:
Enter the number of hours device need to run before kick start reboot process.
By Time:
Enter the specific time of day in hh:mm (24-hour format) to kick start reboots
process.
4.6.3 SNMP Setup
Enable SNMP:
Default is disabled. Check on box to enable.
Read Only Password:
Password to query device.
Engine ID:
Default is 800007e5BD00002704D000007c
Enable SNMP Trap:
Default is disabled. Check on box to enable.
Trap Destination IP:
Enter the IP to send the info when trap is triggered.
Community:
Enter the SNMP community string.
4.6.4 NTP Setup
