14|
P a g e
a small check box next to Eco, Normal, or Power. Directions for
changing the mode are below. Use Eco mode for longer trips to save
battery. Use Power mode for higher performance and hill climbing.
Use Normal for regular riding conditions.
11.
Holding the set key down for 5 seconds will place the display into
the first of 5 setting modes. Release the set key when you see the
screen change. Use the plus and minus keys to adjust the settings in
each mode. Briefly pressing the set key again will cycle to the next
setting mode.
12.
Set Mode 0 – Allows you to select system power mode using plus
and minus keys. Select Eco, Normal or Power.
13.
Set Mode 1 – Allows you to reset the trip 1 odometer by briefly
pressing minus key. WARNING! Holding minus key for 5 seconds
will put bike into walk mode and bike will begin moving at 6mph
unless you are holding the brake lever. Note: The trip 2 odometer is
reset every time you turn off the bike.
14.
Set Mode 2 – Allows you to set the bike’s top speed.
15.
Set Mode 3 – Indicates wheel size
. Malibu should be set at 26 in
.
16.
Set Mode 4 – Allows you to change the from MPH to KPH using
plus and minus keys.
17.
Hold the set button down for 5 seconds to return to operating mode.
18.
In operating mode, the volt indicator will display 54 volts when the
battery is fully charged. At 42 volts you will be out of power.
Summary of Contents for Malibu
Page 36: ...36 P a g e Notes...
