background image

 
 
 

 

Enjoy Model International Corp. (EMI)

 

ETX-41  

Functions: 

1. 

Self-check while power on

, Transmitter will alarm if any major function does not work properly. 

2. 

Low battery warning

, it alarms when the battery of transmitter is lower than 8.4V. 

3. 

All channel reverse switches

.

 

 

4. 

PPM signal shift

 ( + & - ) for all major brand receivers. For avoiding mistake - switching during 

operation, the switching will only take effect while next time power on. 

5. 

Elevon and V-tail mixer build in.

 Switch between Elevon, None or V-tail mixing setup. For avoiding 

mistake - switching during operation, the select switch will only take effect while next time power on. 

6. 

5 minutes timer notice

, buzzer will notice every 5 minutes (-. for 5 minutes, -.. for 10 minutes, -… for 

15 minutes until -…… for 30 minutes, then circle it) when the timer switch is on. 

7. 

Trainer jack

 for instructor (power on side) & student (power off side) training flight. Two EMI 

ETX-41s must set the same shift for trainer operation. It works with all major R/C flight simulators.

 

 

Summary of Contents for ETX-41

Page 1: ... effect while next time power on 5 Elevon and V tail mixer build in Switch between Elevon None or V tail mixing setup For avoiding mistake switching during operation the select switch will only take effect while next time power on 6 5 minutes timer notice buzzer will notice every 5 minutes for 5 minutes for 10 minutes for 15 minutes until for 30 minutes then circle it when the timer switch is on 7...

Page 2: ...le CH 1 CH2 Control stick CH 1 trim lever CH 2 Trim lever Crystal socket Main switch CH 1 2 3 4 servo direction select switchs CH 3 CH4 Control stick CH 3 trim lever CH 4 trim lever Power indicator Mixer switch Shift select switch 5 minutes timer switch Trainer switch Located at back of the transmitter Trainer Jack Located at bottom side ...

Page 3: ...ed for tail less plane V for V Tail mixing CH2 4 mixed for V Tail type plane For avoiding mistake switching during operation the switching will only take effect while next time power on 6 Five Min timer alarms As switch up to on position transmitter will alarm two short Bi sound and start the timing Up to 5 Min it will alarm one long and one short Bi sound one long and two short Bi sound as it is ...

Page 4: ...could result in a violation of the rules or that is recommended to be performed by or under the immediate supervision and responsibility of a person certified as technically qualified to perform transmitter maintenance and repair duties in the private land mobile services and fixed services by an organization or committee representative of users of those services Warning The replacement of any tra...

Reviews: