background image

CLASS 3400 METER

62-0391-03

Dear Valued Customer, 

We are pleased that you chose to buy one of our products, and want you to be just as 

pleased with owning it. Before installing your new E-Mon product, please read the 

information on the following pages carefully. 

We believe that you will find the E-Mon D-Mon meters easy to install and to use for 

monitoring and evaluating your electrical usage. 

To be sure that you are 100% satisfied with your products, we provide toll-free 

technical and sales support Monday through Friday, 8:00 am to 7:30 pm, EST: 

(800) 334-3666. You may also reach us via email at info@emon.com. 

If you have questions, we can handle them quickly and effectively with a telephone call. 

Please let us try to help you BEFORE you remove your meter. And to help us help you, 

we ask that you have all relevant information on hand when you call (model or part 

numbers, nature of difficulty, etc.) 

Be sure to forward this manual to the owner after installation is complete, so that they 

may use it as a reference guide when reading the E-Mon D-Mon meter. 

Thank you.

Summary of Contents for Class 3400 Meter





















Reviews: